Service DivisionsMillwright & RiggingIndustrial Equipment Installation Services

Industrial Equipment Installation Services

Heavy Machinery and Equipment Installation

Crew in hard hats and safety vests installing a long stainless conveyor with a crane in a plant

A new production line rarely arrives as one tidy package. It shows up as crated machines, conveyor sections and control panels, and every piece has to be set, tied in and running by a startup date your plant is already counting on.

At Process Equipment and Controls, installing industrial equipment is everyday work for our Millwright & Rigging division. We install new machines and complete production lines, and we relocate and reinstall equipment you already own. We can carry an installation project from start to finish, or bring in a crew for the parts your own team or other contractors aren’t covering.

What Our Industrial Equipment Installation Services Cover

Our industrial machinery installation services include:

  • New machines added to an existing production line
  • Complete new lines, including conveyor systems and robotic palletizing
  • Relocation and reinstallation of existing lines and machines
  • Industrial rigging, crane rigging and heavy equipment moving
  • Process piping tie-ins in stainless steel, carbon steel, copper and plastic
  • Industrial electrical work, including power, cable tray, PLC panels and VFDs
  • PLC programming and line integration
  • Steel mezzanines, walkways and stairs around the new equipment

How We Install Industrial Machinery

Heavy machine lifted off a trailer with a gantry rig outside a plant

1. Rigging and Moving the Equipment In

Getting heavy machinery from the trailer to its foundation is a planning job before it’s a lifting job. A safe move accounts for the equipment’s actual weight rather than an estimate, its center of gravity, the clearances along the route and whether the floor it crosses can carry the load.

Our industrial rigging and crane rigging crews plan and make those moves, whether the piece comes in under a crane or travels across a working plant floor to its spot on the line.

2. Setting, Leveling and Alignment

Once a machine reaches its foundation, our millwrights set, level, anchor and align it so it sits evenly on its base and starts its service life straight. Getting that right at installation keeps a small error from turning up later as vibration and early bearing wear.

3. Piping and Electrical Tie-Ins

Our mechanical crews tie in the process piping so it meets the equipment without pulling a pump or machine out of line. On food processing lines, that often includes the sanitary stainless and CIP piping the equipment depends on. Our electrical crews bring power to the new equipment and wire up the panels and drives that run it.

4. Controls and Line Integration

Our controls team handles the PLC programming and line integration that bring the separate pieces together, so conveyors, robots and process equipment run as one production line instead of a row of machines that each work on their own. That work matters most when a line combines equipment from several manufacturers, each arriving with its own controls.

5. Startup Support

Our team stays involved through startup, so the people who know how the equipment went in are part of the first run, which is usually when a new line shows what still needs adjusting.

A Line Builder with Every Trade in One Company

Controls technician programming a stainless control panel on a laptop

We call ourselves a line builder because our mechanical, electrical and controls teams work inside one company. On an installation, that means one number to call and one schedule across every trade on the job. We don’t finger-point between trades because there’s no one to point at.

When a question comes up where the piping meets the panel, our own people settle it instead of three contractors trading emails.

It also keeps the controls in step with the mechanical work. When we carry the full installation, our controls team programs a line our own mechanical crews installed.

Relocations and Reinstalls

Large stainless tank strapped to a flatbed trailer for a move

Not every heavy machinery installation starts with new equipment. When a line moves to a new building, comes over from another plant or gets rearranged for a new product, we take it down, move it and reinstall it with the same setting, alignment and tie-in care a new install gets. Our heavy equipment rigging and installation crews handle the move itself.

Equipment Installation for GCs and Engineering Firms

If you’re the GC on a plant construction or expansion, the machinery installation can sit in our package alongside electrical, mechanical, steel and interiors, so equipment setting isn’t bought out as its own subcontract. Our 150-person crew and contract partners give us the depth to take on anything from a single line addition to a full plant expansion.

For GCs on data-center builds, our crews also rig and set major equipment such as chillers, cooling towers, pumps and skids.

If you’re on the engineering side, you’ve designed the layout and specified the equipment, and we’re glad to be a tool in your tool belt when it’s time to install it. We install to your drawings and specifications, and we’d rather earn a spot on your bid list through the work than through a pitch.

What Shapes a Machine Installation Project

A few project variables usually shape how we plan an installation:

  • Will the surrounding line keep running during the work, or is there a shutdown window?
  • Is the equipment new from the manufacturer, or coming out of another plant?
  • How does it reach its foundation: door openings, overhead clearance, floor capacity?
  • Is the foundation ready, or does it need work before the machine sets?
  • What does it tie into: power, compressed air, water, process piping, the plant’s controls network?
  • Who’s programming the controls: the equipment manufacturer, your integrator or our team?

Tell us your shutdown window or startup date, and we’ll talk through how the work fits it.

After the Line Is Running

Mezzanine in pharmaceutical manufacturing plant

When something needs attention after startup, we come back, and because we did the installation, we aren’t starting from scratch. Our industrial maintenance team handles on-call repair and recurring preventive maintenance programs, and plants already enrolled with that team can reach us around the clock for emergency service. When we install a manufacturer’s equipment, we also pass that manufacturer’s own warranty through to you.

Safety on Every Installation

Safety means more than compliance; it’s our covenant with you. We manage safety in-house, and one safety program covers our rigging, mechanical, electrical and controls crews on the job. That program stays with our crews through every stage of the installation, including the days when your production keeps running right beside the work.

Why Teams Choose PEC for Industrial Equipment Installation

We started PEC on a simple principle: quality people in, quality products out. That idea still guides how we think about our crews, because our people are our product. On an installation, it shows in the setting, alignment and tie-ins that are hard to see once the line is running and easy to feel when they haven’t been done right.

From our home base in Covington, Georgia, we install equipment for plants across the Southeast and take on projects nationally. Whether you’re adding one machine or bringing in a full line, we offer a free specification call or quote, with no obligation. Call us at (770) 487-1413, and a member of our team will help you get started.

Your Workplace Safety Expert

Safety means more than compliance; it’s our covenant with you.

OSHA 30hr Safety Certified Logo

Don’t Wait to Plan Ahead!

Whether you’re coordinating your next project or proactively planning your plant maintenance, there’s no better time than right now to contact us.

This field is for validation purposes and should be left unchanged.
What services are you looking for?(Required)